Showing posts with label tutorial. Show all posts
Showing posts with label tutorial. Show all posts

Sunday, January 8, 2012

9" Rail Fence Block for CraftMad Swap

Our CraftMad Swap group wanted to swap a few blocks with each other to make up a CraftMad Quilt.

The first block suggested was a 9" rail fence.

It proved a bit of a challenge for the non-quilters - both in working in inches, and getting their head around the measurements.  It also proved a bit of a challenge for me - trying to size down a 12" block ;-)

The internet came to the rescue and I found a good set of directions that suggested starting with a 5" x 2" strip

As I was going through this process, I thought I would take a few photos to help explain it to the non-quilters and to help reinforce the steps in my own mind.

cut out your fabric strips 4 sets of  3 @ 5" x 2"

Sew strips together in desired order using a 1/4" seam

Sew top two sets together  & bottom two sets together using a 1/4" seam

Sew the two rows together - taking care to make sure your centres line up - using a 1/4" seam

Here is where the quilters ruler is a MOST valuable tool
Place the block underneath the ruler -here it is showing just how it is when finished - note it is a little off - this is your 'wiggle room' to trim

Lining up the block underneath to the required marks on the ruler - in this case top left  at approx 9 1/2" wide,
the
very centre of block intersects at approx 4 3/4"
trim top and right edges 

swivel block around so that bottom left corner lines up with 9 1/2" marks and check the centre of the block intersects at 4 3/4"
trim top and right edges

here block is squared up and finished at 9 1/2 "
the bottom left blook looks a bit crooked in photo, but it is an optical illusion
I used a REALLY cheap Jelly Roll for this exercise and the reason it was cheap was that it was cut crooked ;-(  

VERY IMPORTANT!  Check your seam allowance is actually 1/4" or you will end up with a block with the wrong measurements ;-)

This is the first attempt - this finished section SHOULD be 5" square - with an incorrect seam allowance, it turned out WRONG

The other day, I had moved the position of my needle to do some close to the edge sewing and had not moved it back properly - DOH!

I hope this helps the non-quilters of our little group. 

I will keep you all posted on the progress of our swap - I am really looking forward to making up a lap quilt made especially from members of my CraftMad Family (I have been with them since 2004).



Thank you for visiting my blog today - I hope you have a good day. 
Remember, any day doing something you love makes it a good day ;-) 
Doing what you like is freedom. Liking what you do is happiness.